Solutions of improving the working efficiency of the polishing

machine As the most commonly used round tube polishing equipment, the polishing machine is widely expected by users because of its simple structure design, reasonable design and excellent performance. But in the process of use, there will always be some factors that affect the working efficiency of the polishing machine. Factors Affecting Production

 

polishing machine

 

 

 

 

The polishing machine will be discussed below, and the corresponding method will be found
go out. polisher
The polishing machine can polish iron pipes, stainless steel pipes, aluminum pipes and other materials. The harder the material, the higher the brightness after polishing. If the length of the round tube is more than twice the length of the polishing machine body, the guide roller frame needs to be installed. Otherwise, just a few pulleys driven by the machine itself will increase the resistance of the motor and simply heat the motor. The polishing wheel selected for polishing should also be based on different polishing materials, that is, to speed up the polishing efficiency without damaging the polishing material. Commonly used polishing wheels are yarn wheel, hemp wheel, nylon
Wheels etc. It is worth noting that the depth of polishing should only remove impurities or scratched surfaces. Polishes that are too shallow have no length. Polishing too deeply can cause damage and accelerate wheel wear.


Post time: Nov-19-2022